Laminar flow transfer window is a kind of auxiliary equipment for clean room, which is mainly used for transferring small items between clean area and clean area, and between clean area and non-clean area, in order to reduce the number of opening doors of clean room, and minimize the pollution of clean room. The transfer window is installed with ultraviolet lamps, and the articles are sterilized by ultraviolet irradiation and then enter the clean area. On the one hand, it plays the role of airlock to prevent the high-level clean room from being leaked, and on the other hand, it realizes the self-cleaning effect in the transfer process to ensure that the items entering the clean area are clean and reduce the cross-pollution caused by the objects.

Product characteristics

-层流传递窗内的洁净度要求 : A 级。

-Internal and external double-layer shell, internal arc processing around the perimeter to ensure no gap connection.

-Laminar flow design, air flow direction adopts upward and downward mode, the bottom adopts 304 stainless steel cold rolled plate punching design, and set up reinforcement.

-Air velocity: The air velocity is controlled at 0.36-0.54m/s after passing through the high-efficiency filter (tested at 150mm below the high-efficiency airflow plate).

-Differential Pressure Function: Display the differential pressure of the filter (measuring range 0-500Pa) with an accuracy of ±5Pa.

Control function: fan start / stop button, equipped with built-in electronic door interlock; set the UV lamp, designed to switch separately.

-Access port is set in the lower part of the transfer window for fan access.

-Noise: Noise <65db during normal operation of the transfer window. <>

High-efficiency airflow plate: 304 stainless steel mesh plate is used.

Specifications