DustTrak? 8530, 8532, 8533, 8534 Aerosol Monitors measure aerosol hazards such as dust, smoke, etc. in both indoor and outdoor environments

To get the most out of your instrument, we've put together the following list of 7 tips to help you ensure that your DustTrak? aerosol monitor is always in tip-top shape and to help extend maintenance. and help extend the runtime between maintenance intervals.

Tip 1/ Manual

Tip 2/CLeaning and Calibration 

Return the instrument to the factory once a year for cleaning and calibration for optimal performance. Please note that TSIannual service includes in-house cleaning and calibration.

Tip 3/Zero Check 

/gravity). quot;>gravitydiffusive deposition) of any drift.

Tip 4/ImpactorsBefore each use, remember to Clean all DustTrak IIImpact Particle Sizers (PM1/PM4.5/PM4.5). PM2.5/PM4.0/PM10), add impingement particle size cutter oil, and clean the Dorr- Oliver 10 mmnylon cyclone for proper operation. Refer to the DustTrakmanual for use of the inlet regulator and cleaning procedures.

Tip 5/BBatteriesThe instrument needs to be left inactive for a long time (30天), please recharge the batteries and take the materials of the instrument to be recharged. color: #000000;">Take out the battery.

Tip 6/HEPA Filter 

DustTrakmonitor's HEPA according to the instructions in the manual™ lt;span style="font-size: 16px; font-family: 宋体; color: #000000;">filter.

Tip 7/Inlet Tubing 

For inlet tubing, use only the conductive silicone tubing supplied with the instrument and make it as short and straight as possible (no bends or kinks). (no bends or kinks).

• Previous：What are the main factors affecting filter material performance
• Next：How to choose a filter for an MAU unit