American Hach Insoluble Particle Detector HIAC9703+

•Simplify the sampling process, use less samples, reduce pollution and sampling costs

•Support 21CFR Part II  and Pharma Spec 2.0

•Meet the new USP<789<>> test for ophthalmic products

•Easier monitoring. The smallest pre-extraction volume in the industry

•Small test tube clamp ensures that the sample will not splash during testing

•Automatically perform routine flushing and cleaning, enjoy more time away

Features and advantages

Performance:

•Measurement of particle size (um): 0.1-350um, HRLD

• and Micro Count 5 different measuring range probes to choose from

• Sample viscosity < 20 cp, temperature range 5-40°C

• Sampling flow rate  10-100ml/min

•Flow accuracy>95%, volume accuracy>95%

Customize routine tests and reports

•Customize particle size, sampling volume and run test methods according to the user's unique application requirements

•Users can configure reports

•Enhanced flexibility can configure security access

•Can manage and define multiple security access levels

•Meet the requirements of 21 CFR Part 11 regulations

Injectable drugs

•USP<788>

•EP<2. 19="" 9.="">

•JP<11>,<24>

•KP<52>

Eye drops  ;                                         

•USP<789>

Intake medication

•USP<788>/Levosalbutamol intake medication

Manage all your application needs

Designed to handle the full range from very small volumes (1.0ml)to very large volumes (1,00ml)

•Injectable small dose star

•Injectable large dose

•Research and development

•Troubleshooting

•Stability testing

Easy configuration for maximum flexibility

•Interchangeable sensors from 0. 54um to 600um

•Interchangeable sampling probes

•Interchangeable syringes - depending on the sampling star

•Flow rate can be configured from 10ml/min to 100ml/min

Eliminate instability based on data anomalies

•Alarm notification will be issued when bubbles may affect the counting results

•If the sensor is contaminated, the operator can be reminded

•When routine service or calibration is required, advance notice will be given

•When routine upgrades are available, operators will be notified

•All alarms can provide recommended actions

Eliminate your worries about data loss

•The lost data recovery function can protect test data in the event of an unexpected power outage

•PharmSpec allows operators to schedule data backup to a secure network site

•When your instrument requires routine maintenance, you will be notified by phone

Instrument Validation Service

•SOF assistance and IQ/OQ validation service

•Apply our expertise to make your use easier

•The accuracy of the instrument can be ensured by using archived verification and IS021051-3 regulatory calibration

Technical parameters

9703+ sampler

Operating temperature range        5-40°C(40-104°F), relative humidity 0-80%, non-condensing

Sample temperature range        5-40°C(40-104°F)

Sample viscosity            <50 cp

Power Requirements  Hz

Maximum power            115/230VAC is 67W

Size  H mm (13.5X 13.3X 19.0 inches)

Gap of sampling bottle        153mm(6.02 inchesj

Volume accuracy            >95%

Flow rate accuracy             >95%

Sample flow rate            10-100ml/min: The actual flow rate of the system is determined by the flow rate of the sensor

The pre-pump volume of the probe is 0.091 ml for the 81LX1.2IDmm probe (3.2X0.047 inches)

0.172 ml for the 154 LX 1.2IDmm probe (6.1X0.047 inches)

1.57 for the 140LX6.35IDmm probe ml (5.5X0.25 inches)-large hole

PharmSpec 3 Software

Processor      ;      Pentium1.0GHz

Operating system            Windows XP, Service Pack 2 or later,

Windows Vista, Service Pack 2 or later, Windows 7

Memory                512MB or RAM

Hard disk                The hard disk can provide 2GB of space

Optical drive             CD-ROM, DVD-ROM, USB port or network connection, for installing software

Display                  Good quality VGA video adapter and monitor, 1024X768 or higher resolution

Power supply                 Continuous power supply (UPS)

Removable optical drive      can back up data, such as recordable CDs or network servers, can back up computer hard disk data

COM port                      USB port can be connected to the particle counting sensor

Software                                 Internet Explorer 6.0 and Microsoft Excel, Word or Adobe Acroabt (to access PharSpec reports)

Typical System Configuration - Other Options Available

Article number   Description

2089105-01        9703+sampler

700060GP            PharmSpec 3 Software

DOC026.53.8009      Validation Document - English (Other languages available)

2089007-025           25ml calibration flow rate (other flow rates are also available)

Standard sensor       Range

HRLD-150            1.3 um -150 um

HRLD-150JA        1.3 um -150 um (chemical compatibility)

HRLD-400            2.0 um -400 um

HRLD-600JS        2.0 um-600um (chemical compatibility)

Regulatory Certification              
CE certified according to EMC and Low Voltage Directives: Class I laser product, compliant with IEC/E N 60825-1 and 21CFR1040.10 Laser noise is 50** (**Contact the manufacturer for complete regulatory details)