Wind Speed Sensor Type 8455 (General Purpose) Ideal for temporary and permanent wind speed detection equipment in R&D laboratories, production processes and other applications. type 8455 has built-in electronics and calibration curves to provide a linear signal output. The linear signal is emitted as a current (mA) or voltage (V) signal and can be output to a variety of data loggers or data acquisition systems. Best of all, the user can easily change the current and voltage output ranges in less than five minutes.

Ideal applications include thermal comfort and ventilation studies, critical environment installations (e.g., clean rooms and hospitals), diffuser design analysis, drying process monitoring, airflow monitoring in tunnels and subways, use as a standard for wind tunnels and calibration equipment, greenhouse environmental monitoring and indoor air quality monitoring, and general engineering.

Featured Advantages

Optional 3, 6, 9, or 12 in. Probe

Rugged Ceramic Sensors

Wide range of inspection applications< ;/span>

Fast Response TimeFast Response TimeFast Response Time

Range: 25&... amp;ndash;10,000 ft/min (0.125–50 m/s)

Technical Parameters™ lt;/h3>

1, TSI 8455 series wind speed sensor: TSI 8455 Wind Speed Sensor is a general purpose sensor with a protective tip and rugged ceramic sensor. Flow range: 25–10,000 ft/min (0.125–50 m/s)Wind Speed Sensor 8455 (General Purpose) / 8465 (Windowless) / 8475 (Omni-Directional)Three different types of sensors provide flexibility and a wide dynamic range for your precise measurements. The durable 8455 general inspection probe and 8465 windowless inspection probe demonstrate high accuracy and fast response times in many different applications. The 8475 omni-directional probe allows accurate measurements at low wind speeds and is ideal for use in many different wind directions. All of these models have user configurable wind speed ranges and output options.

2. Introduction to the TSI 8455 Series of Wind Speed Sensors:

Wind speed sensors 8455 (general purpose)/8465 (windowless)/8475 (omni-directional) are ideally suited for R&D labs, manufacturing processes, and other applications that involve The Model 8455 has built-in electronics and calibration curves to provide a linear signal output. The linear signal is emitted as a current (mA) or voltage (V) signal and can be output to a variety of data loggers or data acquisition systems. Best of all, the user can easily change the current and voltage output ranges in less than five minutes.

Ideal applications include thermal comfort and ventilation studies, critical environment installations (e.g., clean rooms and hospitals), diffuser design analysis, drying process monitoring, airflow monitoring in tunnels and subways, and as airflow monitoring in wind turbines. subway, airflow monitoring in tunnels and subways, use as a standard for wind tunnels and calibration equipment, greenhouse environmental monitoring and indoor air quality monitoring, and general engineering applications.

Applications

The probe is connected to the control module using a 16.4-ft (5-m) cable

Press-fit fittings for pipe installation work

Double retaining clips for mounting the probe to a parallel plane

Operation and Maintenance Manual

NIST Accreditation Certificate

Two years limited. 14px;"> Two-year limited warranty

The probe is connected to the control module using a 16.4-ft (5-m) cable

Press fit fittings for pipe installation work

Double retaining clips for mounting the probe to the parallel plane

Double retaining clips for mounting the probe to the parallel plane

Operation and Maintenance Manual<

NIST Certificate of AccreditationNIST Certificate of Accreditation<

Two Years Limited Warranty

Two Years Limited Warranty