&  The wind speed sensor 8465 (without window) is ideally suited for temporary and permanent wind speed testing equipment in R&D laboratories, production processes and other applications. amp;nbsp;  Wind Speed Sensor 8465 (windowless) is ideally suited for temporary and permanent wind speed detection equipment in R&D laboratories, production processes and other applications. model 8465 has built-in electronics and calibration curves to provide a linear signal output. The linear signal is emitted as a current (mA) or voltage (V) signal and can be output to a variety of data loggers or data acquisition systems. Best of all, the user can easily change the current and voltage output ranges in less than five minutes.

    Ideal applications range from thermal comfort and ventilation studies, critical environment installations (e.g., clean rooms and hospitals), diffuser design analyses, drying process monitoring, airflow monitoring in tunnels and subways, use as a standard in wind tunnels and calibration equipment, greenhouse environment monitoring and indoor air quality monitoring, and general engineering applications.

This is a new type of airflow measurement.

Featured Benefits

TSI 8455

Guard Probe

Optional 3, 6, 9, or 12-inch probe

Selectable 3, 6 9, or 12-inch probe

Rugged ceramic sensor

Rugged ceramic sensor

Wide range of inspection applications

Fast Response time

Range:25–10,000 ft/min (0.125&;ndash;50 m/s). ndash;50 m/s)

TSI 8465

Low Flow Occlusion

Optional 3, 6, 9, or 12-inch probe

Optional 3, 6 9 or 12-inch probe

Suitable for detection in confined spaces

Fast response time

Range:25–10,000 ft/min (0.125–50 m/s)

Range. gt;TSI 8475

Omni-directional probe

Optional 3-, 6-, 9-, or 12-inch probe

Optional 3-, 6-, 9-, or 12-inch probe

>10 to 100 ft/min

(0.05 to 0.5 m/s) Detection in the low speed range

(0.05 to 0.5 m/s) Detection in the low speed range

Suitable for detection of unknown or changing flow direction

Technical Parameters

Probe uses 16.4-ft. (5-m) cable to the control module

Protective Case

Compression fittings for pipe installation work

Double Retaining Clamp. For mounting the probe to the parallel plane

Operation and Maintenance Manual

NIST Certificate of Accreditation.

Low-flow occlusion

Optional 3, 6, 9, or 12-inch probe

Optional 3, 6, 9, or 12-inch probe

>Suitable for detection in confined spaces

Fast response time

Range:25&ndash. 10,000 ft/min (0.125–50 m/s)

Application range

   1, TSI . 8455 Series Wind Speed Sensor:
    TSI 8455 Wind Speed Sensor is a general purpose sensor with protective tip and rugged ceramic sensor. Flow range:25–10,000 ft/min (0.125–50 m/s) Wind Speed Sensor 8455 (General Purpose)/8465 ( Windowless)/ 8475 (Omni-directional) Three different types of sensors provide flexibility and a wide dynamic range for your measurements. The durable 8455 general inspection probe and the 8465 windowless inspection probe both demonstrate high accuracy and fast response times in many different applications. The 8475 Omni-Directional Probe allows measurements to be made at low wind speeds and is ideally suited to a wide range of different wind directions. All these models can be set by the user wind speed range and output options. 2, TSI 8455 series wind speed sensor introduction:wind speed sensor 8455 (general purpose)/8465 (windowless)/ 8475 (omni-directional) is very suitable for research and development laboratories, production processes and The Model 8455 s built-in electronics and calibration curve provide a linear signal output. The linear signal is sent as a current (mA) or voltage (V) signal and can be output to a variety of data loggers or data acquisition systems.  Most importantly, the user can easily change the current and voltage output ranges in less than five minutes. Ideal applications include thermal comfort and ventilation studies, critical environment installations (e.g., clean rooms and hospitals), diffuser design analysis, drying process monitoring, airflow monitoring in tunnels and subways, use as a standard in wind tunnels and calibration equipment, greenhouse environment monitoring and indoor air quality monitoring, and general engineering applications. lt;p>