Wind Speed ​​Sensor The 8475 (omnidirectional) is ideal for temporary and permanent wind speed monitoring in R&D labs, production processes and other applications. It has built-in electronics and calibration curves to provide a linear signal output. The linear signal is issued as a current (mA) or voltage (V) signal, which can be output to a variety of data loggers or data acquisition systems. Best of all, the user can easily change the current and voltage output ranges in less than five minutes.

Ideal applications include thermal comfort and ventilation studies, critical environment installations (such as clean rooms and hospitals), diffuser design analysis, drying process monitoring, airflow monitoring in tunnels and subways, use as a standard for wind tunnels and calibration equipment, greenhouse environmental monitoring and indoor air quality monitoring, and general engineering applications.

Features and Benefits

Omnidirectional Probe

Optional 3, 6, 9 or 12 inch probe

10 to 100 ft/min

(0.05 to 0.5 m/s) low speed range for accurate detection

Suitable for detecting flow direction unknown or changing

Technical Parameters

The probe is connected to the control module using a 16.4-ft (5-m) cable

Protective cover

Compression fitting for pipe installation work

Dual retaining clips for mounting the probe to parallel surfaces

Operation and Maintenance Manual

NIST Calibration Certificate

NIST Calibration Certificate

Two-year limited warranty