Online dust particle counter is also called dust particle online monitoring system. The clean area environment online monitoring system is to install multiple remote particle sensors at various key sampling points in the workshop, sample and record the air in the monitoring area in real time through the sensor, and transmit the monitoring results to the control computer, and use professional pharmaceutical monitoring software that complies with 21CFR PART11 for processing, so as to realize dynamic monitoring of suspended particles.
 

The system includes the following contents

(1) Particle monitoring system;

(2) Planktonic bacteria sampling system;(3) Extended monitoring systems such as temperature, humidity, and pressure difference;(4) On-site alarm system;(5) Monitoring software system that complies with 21CFR PART11;(6) Central vacuum system;(7) Project management, installation and commissioning, and system testing;(8) Project verification documentation system;(9) Training and after-sales service.

Features of the dust particle online monitoring system

Reduce labor costs, avoid the factors of manual inspection and interference with the clean room environment;

Meet the requirements for obtaining continuous production data, so that the entire production process can be monitored in real time:

The monitoring points are fixed in time and space, and the particle counting quality is high, meeting the requirements of accurate data;

The data monitored at the same sampling point are comparable and referenceable. Continuous monitoring will establish a typical baseline for monitoring in the production process. Based on this baseline, the alarm limit and movement limit can be determined based on experience, which is GMP

The 7XXX series counter of TSI Company of the United States is the most cost-effective remote particle counter on the market. It can collect data in real time and upload the data to the FMS online monitoring system using Ethernet communication method Modbus TCP, serial communication method Modbus RTU or 4-20mA analog output method. If Ethernet communication method is adopted, it can be powered by RJ45 network cable port (POE), and the system configuration is more flexible, reducing the laying of wires and saving costs. In addition, this instrument uses IE browser to configure parameters, which is simple and easy to use.

TSI AeroTrak Remote Particle Counter 7501�1�0 provides the most functions and the greatest flexibility that any other remote particle counter on the market cannot match. It is easily integrated using Ethernet (TCP/IP) or serial Modbus RTU communication. The instrument can be powered via an Ethernet connection (Power over Ethernet) or a local power supply, simplifying installation. It can be configured using a local PC or via a web browser.