Total Organic Carbon (TOC), TOC analyzer is a total organic carbon analyzer. The carbon content is used to represent the total amount of organic matter in the water. TOC can be used directly to represent the total amount of organic matter. Therefore, it is used as an important reference indicator for evaluating the degree of organic pollution in water.
The basic principle of TOC is: first oxidize the carbon of organic matter in water into carbon dioxide, eliminate interference factors, and then use the carbon dioxide detector to measure, and then use data processing to convert the carbon dioxide gas content into the concentration of organic matter in water. After continuous research and experiments, TOC detection methods have gradually changed from traditional complex technologies to convenient and accurate.
Plug and Play type —— Easy to install, start up and operate.
Online TOC measurement can completely and accurately oxidize the sample.
Meet the requirements of USP<643>,<645>, and EP 2.2.44 for TOC analysis.
Accurate measurement, not affected by pressure or flow rate.
High reliability, rugged and durable, all-metal design.
No reagents or chemicals are required.
No external controller is required to operate the analyzer.
Anatel TOC analyzers are the industry standard for TOC analysis in pure and ultrapure water.
ANATEL TOC600 analyzer can provide online TOC analysis in a variety of applications,
In these applications, TOC analysis needs to meet USP<643> and EP 2.2.44, and conductivity measurement needs to meet USP<645>.
The ANATEL TOC600 analyzer combines a rugged all-metal design with patented flow-blocked oxidation technology.
This method can completely oxidize the water sample enclosed in the oxidation chamber and fully comply with USP<643> and EP 2.2.44.
The wide dynamic range of the ANATEL TOC600 analyzer allows monitoring of TOC levels in a variety of water systems.
The CSV module is a stand-alone, portable module that allows for easy verification, calibration, and system suitability testing of the TOC600 analyzer.
ANATEL TOC600 analyzers can use a multi-point calibration method to provide an accurate calibration curve.
Independent CSV modules can be used by multiple analyzers, and the use of standard reagents is also significantly reduced, thereby effectively reducing the user's cost of use.
Each ANATEL TOC600 analyzer can be operated using a remote control input.
With a rugged design, high reliability, superior performance, compliance with USP and EP regulations, and lower user costs,
ANATEL TOC600 analyzer embodies the value of a new generation of TOC analyzers.
Technical Parameters of AITEL TOC600 HACH Online Total Organic Carbon Analyzer from the United States
Range
| 1～1,000ppb, calculated by carbon |
| Reproducibility | 1% or 1 ppb, whichever is greater |
| Display resolution | 1 ppb |
| TOC accuracy | 2% (10-40°C ), 5% (40-50°C ) |
| Conductivity accuracy | 2% (10-40°C ), 5% (40-50°C ) |
| Conductivity accuracy | 2% (10-40°C ) , 3% (40-50°C ) |
| Conductivity range | 0.05- 150 uS/cm (@ 25°C) |
| Conductivity display resolution | 0.01 in the entire range uS/cm |
| Resistance range | 0.01 -18 MΩ;.cm (@ 25°C） |
| Resistance display resolution | 0.1 (up to 14.9 MΩ .cm), 1.0 (from 15-18 MΩ .cm) |
| Maximum input conductivity | For all water is 0.2 u S/cm, For all neutral Water is 1.0 uS/cm For all water with only carbon dioxide as the conductive medium, 5 uS/cm |
| Conductivity Mode | Temperature compensation to 25°C or non-temperature compensation |
| Temperature Accuracy | ±0.5°C |
| Measureable water resistance range | 0.2 ~18.2 MO.cm (0.05 ~5 u S/cm) |
| Temperature | 5 ~95C (41 ~2030F) |
| Flow rate | 60 mL/min - 300 mL/min |
| Pressure | 10 - 100 psi (60 - 690 kPa) |
| Installation category | 11,IEC 1010 |
| Power supply | 100 ～240 VAC, ±10%, 50/60 Hz |
| Size | 193mm H x 419mm W x 119mm D (7.6" H x 16.5" W x 4.7" D) |
| Pollution level | 2, IEC 664 |
| Ambient temperature | 10 - 50 °C (50-1220F) |
| Humidity | 95% Relative humidity, non-condensing |
| The highest altitude | 4,000 meters(13,125 ft) |
| Weight | 4.85 kg (10.7 lbs) |
| Analog signal | 4-20 mA, photoelectric isolation 12VDC, unshielded @ 0.5A max |
| Digital signal | Two-way photoelectric isolation input and two-way photoelectric isolation output |
| Serial communication | |
| A-net | RS-485 communication protocol Connect up to 8 sensorsConnect up to 8 controllersMaximum network length is 1 km (3,000 ft) |
| cable | double-axis shielded cable, twist lock Type connector |
WeChat Account
WeChat Video Account
Home
Product
News
phone